1. Support for USB Enhancement Module.

1. Support for USB Enhancement Module.

1. Support for USB Enhancement Module.

1. Support for USB Enhancement Module.

1. Support for USB Enhancement Module.

1. Support for USB Enhancement Module.

• Bug Fix: Improved power-on reliability.
• Bug Fix: Fixed issue where panel would sometimes fail to start after power-cyle, reboot, or reset.
• Bug Fix: Fixed crash related to profile changes.
• Improve crash logging.

Correction for Ref LED not illuminating in 625.

Added comb mode control (3 or 5 line) and control graying.

Correction for Ref LED not illuminating in 625.

Adds ASI support.

• Added graying to the Setup Control so it grays during SMPTE and RGB and any 625 modes.

Adds a control which allows the user to select narrow or wide blanking of the vertical interval.

Initial Release

Adds ASI support.

Improves USB performance.

• Improves USB reliability.

• Fixes several issues in audio embedding/disembedding.
• Improved USB reliability.

• Fixes several issues in audio embedding/disembedding.
• Improved USB reliability.

• Fixes several issues in audio embedding/disembedding.
• Improved USB reliability.

• Fixes several issues in audio embedding/disembedding.
• Improved USB reliability.

• Fixes several issues in audio embedding/disembedding.
• Improved USB reliability.

1. Support for USB Enhancement Module.

1. Support for USB Enhancement Module.

Improved USB Reliability

1. Support for USB Enhancement Module.

Added new control to select framerates for the TLS output. Improves USB performance.

Improves USB performance.

1. Support for USB Enhancement Module
2. Removed green line from SD 525 crosshatch.
3. Flat 50 preset now works correctly.
4. 1080p/59.94 TLS now correct.

1. Support for USB Enhancement Module
2. Removed green line from SD 525 crosshatch.
3. Flat 50 preset now works correctly.
4. 1080p/59.94 TLS now correct.

• Added new feature to support Mux/Demux simultaneously.
• Support for Remora USB board.

1. Allows you to take audio from embedded audio and analog audio at the same time then mix and shuffle audio channels. Completely new interface, all settings will be lost during update.
2. First version took away the ability to set Demux and Mux from the front buttons. 2.0.2 added this back in; you can now select Mux and Demux from the front again.

1. Support for USB Enhancement Module.

1. Support for USB Enhancement Module.

• Fixes audio bug in replace mode.
• Added audio clock phase.

• Fixes audio bug in replace mode.
• Added audio clock phase.

• Improved USB performance
• Audio Mixer now shows up correctly in menu.

• Initial Release

• Initial Release

• Added audio shuffle mode.
• Improved HDMI detection on power up.
• Fixes bug where unit would get stuck “Loading” in BrightEye applicaiton.

• Added audio shuffle mode
• Improved HDMI detection on power up.
• Fixes bug where unit would get stuck “Loading” in BrightEye applicaiton.

• Added audio shuffle mode
• Improved HDMI detection on power up.
• Fixes bug where unit would get stuck “Loading” in BrightEye applicaiton.

1. Support for USB Enhancement Module.

1. Support for USB Enhancement Module.

1. Support for USB Enhancement Module.

1. Support for USB Enhancement Module.

1. Support for USB Enhancement Module.

1. Support for USB Enhancement Module.

1. Support for USB Enhancement Module.

1. Support for USB Enhancement Module.

1. Support for USB Enhancement Module.

Update Features:

• fixed bug where unit would get stuck in loading with BrightEye Control software.

Update Features:

• fixed bug where unit would get stuck in loading with BrightEye Control software.

Update Features:

• Added ability to turn on/off HDCP
• fixed bug where unit would get stuck in loading with BrightEye Control software.

Update Features:

• fixed bug where unit would get stuck in loading with BrightEye Control software.

Update Features:

• fixed bug where unit would get stuck in loading with BrightEye Control software.

Update Features:

• fixed bug where unit would get stuck in loading with BrightEye Control software.

Update Features:

• Added support for Remora USB hardware
• Fixed bug with unit getting stuck in Loading with BrightEye Control software.

Update Features:

• Added ability to turn on/off HDCP
• fixed bug where unit would get stuck in loading with BrightEye Control software.

Update Features:

• fixed bug where unit would get stuck in loading with BrightEye Control software.

Update Features:

• fixed bug where unit would get stuck in loading with BrightEye Control software.

Full Release Notes and History
1. New Firmware code to correct play and hold logo playback
2. Corrections for timing in 1080P50, 59, and 60 formats.
3. Repaired code that allows the TSM to update correctly.

Full Release Notes and History
1. New Firmware code to correct play and hold logo playback
2. Corrections for timing in 1080P50, 59, and 60 formats.
3. Repaired code that allows the TSM to update correctly.

Full Release Notes and History
1. New Firmware code to correct play and hold logo playback
2. Corrections for timing in 1080P50, 59, and 60 formats.
3. Repaired code that allows the TSM to update correctly.

Full Release Notes and History

1. New Firmware code to correct play and hold logo playback
2. Corrections for timing in 1080P50, 59, and 60 formats.
3. Repaired code that allows the TSM to update correctly.

Full Release Notes and History
1. New Firmware code to correct play and hold logo playback
2. Corrections for timing in 1080P50, 59, and 60 formats.
3. Repaired code that allows the TSM to update correctly.

1. New Firmware code to correct play and hold logo playback
2. Corrections for timing in 1080P50, 59, and 60 formats.
3. Repaired code that allows the TSM to update correctly.

1. New Firmware code to correct play and hold logo playback.
2. Corrections for timing in 1080P50, 59, and 60 formats.
3. Repaired code that allows the TSM to update correctly.

Detailed information on 3.0.0 release software for the NXT line.